Difference between revisions of "Exim"

From wiki
m (fail2ban description)
(Update certmanage command)
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
== Prerequisite ==
 +
This article is part of the [[Emails/Complete|emails]] series. It is assumed that you already covered [[Dovecot]].
 +
 +
This guide also uses the following software:
 +
* [[Let’s Encrypt]] or another way to get certificates
 +
* [[nftables]] as a firewall
 +
* [[Fail2Ban]]. Optional but recommended for security.
 +
 
== Install ==
 
== Install ==
−
{{TODO}}
+
<syntaxhighlight lang="console">
 +
$ sudo apt install exim4-daemon-heavy
 +
</syntaxhighlight>Note: The heavy version is needed to use Dovecot as an authentication mechanism.
  
 
== Configure ==
 
== Configure ==
−
{{TODO}}
 
  
−
== Fail2ban ==
+
=== Base ===
−
The filter for exim is already included in debian, we just need to activate it. It will filter people trying to log on your server, trying to make it relay spam, and sending nonsense command.
+
Create file <code>/etc/exim4/conf.d/main/00_local_settings</code><syntaxhighlight lang="properties">
 +
daemon_smtp_ports = smtp : 587
 +
</syntaxhighlight>
 +
 
 +
=== TLS Certificates ===
 +
 
 +
==== Create folder ====
 +
Unlike other programs, Exim doesn't read it's certificate as the root user. So it will be unable to read them from the standard let’sencrypt folder. We will create a folder readable by Exim where we can safely drop certificates later<syntaxhighlight lang="console">
 +
$ sudo mkdir -m 710 /etc/exim4/private
 +
$ sudo chgrp Debian-exim /etc/exim4/private
 +
</syntaxhighlight>
  
−
Create file <code>/etc/fail2ban/jail.d/exim.conf</code><syntaxhighlight lang="ini">
+
==== Get certificate ====
 +
# Edit file <code>/etc/nginx/sites-enabled/noweb</code> an add a <code>server_name</code> line for <code>smtp.example.org</code>
 +
# Activate your new domain in Nginx<syntaxhighlight lang="console">
 +
$ sudo systemctl reload nginx.service
 +
</syntaxhighlight>
 +
# Edit file <code>/usr/local/sbin/renew_certificates</code> and add the following to the config list<syntaxhighlight lang="json">
 +
{
 +
    "domains": ["smtp.example.org"],
 +
    "reload": [["cp", "--preserve=all", "/etc/letsencrypt/live/smtp.example.org/fullchain.pem", "/etc/letsencrypt/live/smtp.example.org/privkey.pem", "/etc/exim4/private/"], ["/bin/systemctl", "reload", "exim4.service"]]
 +
}
 +
</syntaxhighlight>
 +
# Get Your certificate{{Let’s Encrypt/New Cert Command|domain = smtp.example.org|command = cp --preserve=all /etc/letsencrypt/live/smtp.example.org/{fullchain,privkey}.pem /etc/exim4/private/
 +
/bin/systemctl reload exim4.service}}
 +
 
 +
==== Use Certificate ====
 +
Edit <code>/etc/exim4/conf.d/main/00_local_settings</code> and add the following lines<syntaxhighlight lang="properties">
 +
MAIN_TLS_ENABLE = true
 +
MAIN_TLS_CERTIFICATE = /etc/exim4/private/fullchain.pem
 +
MAIN_TLS_PRIVATEKEY = /etc/exim4/private/privkey.pem
 +
# GNUTLS ciphers: https://www.gnutls.org/manual/html_node/Priority-Strings.html
 +
# test using: gnutls-cli -l --priority PFS:+RSA:...
 +
tls_require_ciphers = PFS:+RSA:-ARCFOUR-128:-3DES-CBC:-MD5:-SIGN-RSA-MD5:-CAMELLIA-128-CBC:-CAMELLIA-256-CBC:-CURVE-SECP192R1:%SERVER_PRECEDENCE
 +
</syntaxhighlight>
 +
 
 +
=== Authentication ===
 +
We will use dovecot to verify user login and password. It lets us have only one database of users and share it between the different email infrastructure parts (smtp, imap...)
 +
 
 +
==== Dovecot ====
 +
First modify the file <code>/etc/dovecot/conf.d/10-master.conf</code>. Find the section <code>service auth</code> and add the following lines<syntaxhighlight lang="properties">
 +
service auth {
 +
    ...
 +
    # Authentication socket used by Exim
 +
    unix_listener auth-client {
 +
        mode = 0600
 +
        user = Debian-exim
 +
    }
 +
    ...
 +
}
 +
</syntaxhighlight>And apply config with<syntaxhighlight lang="console">
 +
$ sudo systemctl restart dovecot.service
 +
</syntaxhighlight>
 +
 
 +
==== Exim ====
 +
Create file <code>/etc/exim4/conf.d/auth/15_dovecot</code><syntaxhighlight lang="properties">
 +
dovecot_login:
 +
  driver = dovecot
 +
  public_name = LOGIN
 +
  server_socket = /run/dovecot/auth-client
 +
  server_set_id = $auth1
 +
 
 +
dovecot_plain:
 +
  driver = dovecot
 +
  public_name = PLAIN
 +
  server_socket = /run/dovecot/auth-client
 +
  server_set_id = $auth1
 +
</syntaxhighlight>
 +
 
 +
=== Smart catch ===
 +
This is my #1 spam fighting technique. It allows me to have an infinite number of email addresses while still preventing spammers to generate them.
 +
 
 +
You can check the [[Exim/SmartCatch|installation instructions]].
 +
 
 +
=== Dovecot Delivery ===
 +
Create file <code>/etc/exim4/conf.d/router/899_dovecot</code><syntaxhighlight lang="properties">
 +
## router/899_dovecot
 +
#################################
 +
 
 +
dovecot:
 +
  debug_print = "R: dovecot for $local_part@$domain"
 +
  driver = accept
 +
  domains = +local_domains
 +
  transport = dovecot_virtual_delivery
 +
  cannot_route_message = Unknown user
 +
</syntaxhighlight>Then create <code>/etc/exim4/conf.d/transport/99_dovecot_virtual_delivery</code><syntaxhighlight lang="properties">
 +
dovecot_virtual_delivery:
 +
  driver = pipe
 +
  command = /usr/lib/dovecot/dovecot-lda -d $local_part -a $original_local_part@$original_domain  -f $sender_address -e
 +
  message_prefix =
 +
  message_suffix =
 +
  delivery_date_add
 +
  envelope_to_add
 +
  return_path_add
 +
  log_output
 +
  user = vmail
 +
  temp_errors = 64 : 69 : 70: 71 : 72 : 73 : 74 : 75 : 78
 +
</syntaxhighlight>
 +
 
 +
=== Firewall ===
 +
{{nftables/config|category = Exim|tcp_port_in = 25, 587|udp_port_in = |tcp_port_out =25 |udp_port_out = |user_out = }}
 +
 
 +
=== DKIM ===
 +
[[Exim/DKIM]]
 +
 
 +
=== Paniclog ===
 +
In case Exim encounter a grave problem (cannot start, lost email…) it will write a log to <code>/var/log/exim4/paniclog</code>.  There is a cron job that monitor this file and will send you a daily mail if it is not empty.
 +
 
 +
It is important to not miss these emails and act on them quickly. I use a [[Dovecot|Sieve]] script to mark them as important:<syntaxhighlight lang="c">
 +
if header :matches "Subject" "exim paniclog on * has non-zero size" {
 +
    addflag "\\Flagged";
 +
}
 +
</syntaxhighlight>Also note that this log file is never rotated. So you will get the same email over and over until you do it manually. It can be done with:<syntaxhighlight lang="console">
 +
$ sudo logrotate -f /etc/logrotate.d/exim4-paniclog
 +
</syntaxhighlight>To have this rotation done automatically (and thus receive the email only once), edit <code>/etc/default/exim4</code><syntaxhighlight lang="shell">
 +
# Rotate /var/log/exim4/paniclog after email is sent to admin
 +
E4BCD_WATCH_PANICLOG='once'
 +
</syntaxhighlight>
 +
 
 +
== Fail2Ban ==
 +
The filter for Exim is already included in Debian, we just need to activate it. It will filter people trying to log on your server, trying to make it relay spam, and sending nonsense command.
 +
 
 +
Create file <code>/etc/fail2ban/jail.d/exim.conf</code>
 +
<syntaxhighlight lang="ini">
 
[exim]
 
[exim]
 
enabled  = true
 
enabled  = true
Line 14: Line 144:
 
logpath  = %(exim_main_log)s
 
logpath  = %(exim_main_log)s
 
</syntaxhighlight>
 
</syntaxhighlight>
−
[[Category:Install]]
+
 
 +
[[Category:Email Server]]
 
[[Category:Fail2Ban]]
 
[[Category:Fail2Ban]]
 +
[[Category:Linux Server]]

Latest revision as of 11:29, 3 May 2018

Prerequisite

This article is part of the emails series. It is assumed that you already covered Dovecot.

This guide also uses the following software:

Install

$ sudo apt install exim4-daemon-heavy

Note: The heavy version is needed to use Dovecot as an authentication mechanism.

Configure

Base

Create file /etc/exim4/conf.d/main/00_local_settings

daemon_smtp_ports = smtp : 587

TLS Certificates

Create folder

Unlike other programs, Exim doesn't read it's certificate as the root user. So it will be unable to read them from the standard let’sencrypt folder. We will create a folder readable by Exim where we can safely drop certificates later

$ sudo mkdir -m 710 /etc/exim4/private
$ sudo chgrp Debian-exim /etc/exim4/private

Get certificate

  1. Edit file /etc/nginx/sites-enabled/noweb an add a server_name line for smtp.example.org
  2. Activate your new domain in Nginx
    $ sudo systemctl reload nginx.service
  3. Edit file /usr/local/sbin/renew_certificates and add the following to the config list
    {
    "domains": ["smtp.example.org"],
    "reload": [["cp", "--preserve=all", "/etc/letsencrypt/live/smtp.example.org/fullchain.pem", "/etc/letsencrypt/live/smtp.example.org/privkey.pem", "/etc/exim4/private/"], ["/bin/systemctl", "reload", "exim4.service"]]
}
  4. Get Your certificate
    $ sudo /usr/local/sbin/certmanage
Renewing certificate for smtp.example.org that will expire on 0001-01-01

Saving debug log to /var/log/letsencrypt/letsencrypt.log
Starting new HTTPS connection (1): acme-v01.api.letsencrypt.org
Obtaining a new certificate
Performing the following challenges:
http-01 challenge for smtp.example.org
Using the webroot path /var/www/acme-challenge for all unmatched domains.
Waiting for verification...
Cleaning up challenges
Generating key (2048 bits): /etc/letsencrypt/keys/1764_key-certbot.pem
Creating CSR: /etc/letsencrypt/csr/1764_csr-certbot.pem

IMPORTANT NOTES:
 - Congratulations! Your certificate and chain have been saved at
   /etc/letsencrypt/live/smtp.example.org/fullchain.pem. Your cert
   will expire on 2025-02-21. To obtain a new or tweaked version of
   this certificate in the future, simply run certbot again. To
   non-interactively renew *all* of your certificates, run "certbot
   renew"
 - If you like Certbot, please consider supporting our work by:

   Donating to ISRG / Let's Encrypt:   https://letsencrypt.org/donate
   Donating to EFF:                    https://eff.org/donate-le

Restarting services:
cp --preserve=all /etc/letsencrypt/live/smtp.example.org/{fullchain,privkey}.pem /etc/exim4/private/
/bin/systemctl reload exim4.service

Use Certificate

Edit /etc/exim4/conf.d/main/00_local_settings and add the following lines

MAIN_TLS_ENABLE = true
MAIN_TLS_CERTIFICATE = /etc/exim4/private/fullchain.pem
MAIN_TLS_PRIVATEKEY = /etc/exim4/private/privkey.pem
# GNUTLS ciphers: https://www.gnutls.org/manual/html_node/Priority-Strings.html
# test using: gnutls-cli -l --priority PFS:+RSA:...
tls_require_ciphers = PFS:+RSA:-ARCFOUR-128:-3DES-CBC:-MD5:-SIGN-RSA-MD5:-CAMELLIA-128-CBC:-CAMELLIA-256-CBC:-CURVE-SECP192R1:%SERVER_PRECEDENCE

Authentication

We will use dovecot to verify user login and password. It lets us have only one database of users and share it between the different email infrastructure parts (smtp, imap...)

Dovecot

First modify the file /etc/dovecot/conf.d/10-master.conf. Find the section service auth and add the following lines

service auth {
    ...
    # Authentication socket used by Exim
    unix_listener auth-client {
        mode = 0600
        user = Debian-exim
    }
    ...
}

And apply config with

$ sudo systemctl restart dovecot.service

Exim

Create file /etc/exim4/conf.d/auth/15_dovecot

dovecot_login:
  driver = dovecot
  public_name = LOGIN
  server_socket = /run/dovecot/auth-client
  server_set_id = $auth1

dovecot_plain:
  driver = dovecot
  public_name = PLAIN
  server_socket = /run/dovecot/auth-client
  server_set_id = $auth1

Smart catch

This is my #1 spam fighting technique. It allows me to have an infinite number of email addresses while still preventing spammers to generate them.

You can check the installation instructions.

Dovecot Delivery

Create file /etc/exim4/conf.d/router/899_dovecot

## router/899_dovecot
#################################

dovecot:
  debug_print = "R: dovecot for $local_part@$domain"
  driver = accept
  domains = +local_domains
  transport = dovecot_virtual_delivery
  cannot_route_message = Unknown user

Then create /etc/exim4/conf.d/transport/99_dovecot_virtual_delivery

dovecot_virtual_delivery:
  driver = pipe
  command = /usr/lib/dovecot/dovecot-lda -d $local_part -a $original_local_part@$original_domain  -f $sender_address -e
  message_prefix =
  message_suffix =
  delivery_date_add
  envelope_to_add
  return_path_add
  log_output
  user = vmail
  temp_errors = 64 : 69 : 70: 71 : 72 : 73 : 74 : 75 : 78

Firewall

Assuming that you configured nftables as described, you can edit file /etc/nftables/main_config.conf and add 

# Exim
add element  inet main  tcp_port_in { 25, 587 }
add element  inet main  tcp_port_out { 25 }

and activate it using 

$ sudo /etc/nftables/reload_main.conf

DKIM

Exim/DKIM

Paniclog

In case Exim encounter a grave problem (cannot start, lost email…) it will write a log to /var/log/exim4/paniclog. There is a cron job that monitor this file and will send you a daily mail if it is not empty.

It is important to not miss these emails and act on them quickly. I use a Sieve script to mark them as important:

if header :matches "Subject" "exim paniclog on * has non-zero size" {
    addflag "\\Flagged";
}

Also note that this log file is never rotated. So you will get the same email over and over until you do it manually. It can be done with:

$ sudo logrotate -f /etc/logrotate.d/exim4-paniclog

To have this rotation done automatically (and thus receive the email only once), edit /etc/default/exim4

# Rotate /var/log/exim4/paniclog after email is sent to admin
E4BCD_WATCH_PANICLOG='once'

Fail2Ban

The filter for Exim is already included in Debian, we just need to activate it. It will filter people trying to log on your server, trying to make it relay spam, and sending nonsense command.

Create file /etc/fail2ban/jail.d/exim.conf 

[exim]
enabled  = true
port     = 25,587
logpath  = %(exim_main_log)s
Retrieved from ‘https://wiki.meurisse.org/index.php?title=Exim&oldid=676’